BMBXS - INSTAPAK-200 COMPONENT B
- MSDS: BMBXS
- Manufacturer: SEALED AIR CORP
- Product Name: INSTAPAK-200 COMPONENT B
- National Stock Number: 8135-01-203-5831
Product Identification
Product ID:INSTAPAK-200 COMPONENT B
MSDS Date:07/01/1991
FSC:8135
NIIN:01-203-5831
MSDS Number: BMBXS
Responsible Party
DANBURY, CT 06810
US
Emergency Phone: 203-791-3500;800-424-9300(CHEMTREC)
Info Phone: 203-791-3500
Cage: 51614
Contractor
Telephone: 203-791-3500/800-424-9300(CHEMTREC)
Cage: 51614
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:VAPORS MAY BE IRRITATING IF HOT.
SKIN: RPTD CONT MAY BE IRRITATING. EYE: CAN CAUSE IRRIT. PERMANENT
CORNEAL INJURY IS UNLIKELY. INGEST: INGESTION IS UNLIKELY. LARGE
QUANTITIES COULD CAUSE IRRITA TION OF MOUTH & STOMACH. CHLOROCARBON
&CHLOROFLUOROCARBON (CFC) MATL HAVE PRODUCED SENSITIZATION OF (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:MYOCARDIUM TO EPINEPHRINE IN LAB
ANIMALS AND COULD HAVE SIMILAR EFFECT IN HUMANS. ADRENOMIMETICS
(E.G., EPINEPHRINE) MAY BE CONTRAINDICATED EXCEPT FOR
LIFE-SUSTAINING USES IN HUMANS ACUTELY O R CHRONICALLY EXPOSED TO
CFC'S .
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:INHAL: REMOVE TO UNCONTAMINATED AREA, ADMINISTER O2 IF
NECESSARY; CONSULT PHYS. SKIN:WASH THOROUGHLY WITH SOAP AND WATER.
LAUNDER CLOTHING BEFORE REUSE. EYE: FLUSH WITH WATER FOR AT LEAST
15 MIN, HOLD ING LIDS OPEN WITH FINGERS. CONSULT PHYS. INGEST:
DRINK WATER TO DILUTE. CONSULT PHYS. TREATMENT IS SYMPTOMATIC.
Fire Fighting
Extinguishing Media:CO2, CHEMICAL FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
SHOULD BE WORN TO PROTECT AGAINST O2 DEFICIENT ATM & HAZ DECOMP
PROD. OVERHEAT OF CONTR CAN LEAD TO (SUPP DATA)
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITON PRODUCTS MAY INCLUDE
CHLORIDE, FLUORIDES AND PHOSGENE .
Accidental Release
Spill Release Procedures:ABSORB ON LOOSE, ABSORBENT, NON- BIODEGRADABLE
MATERIAL. PROVIDE SUFFICIENT VENTILATION TO MAINTAIN
TRICHLOROFLUOROMETHANE LEVEL BELOW PEL OF 1000 PPM. EYE AND SKIN
PROTECTION SHOULD BE WORN.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL AREA. CONTAINERS ABOVE
80F(27C) WILL BE UNDER PRESSURE AND MUST BE OPENED WITH CARE. STOR:
MIN 35F, MAX 110F. SHELF LIFE: 12 MONTHS.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GENERAL
VICINITY OF ARC WELDING, OPEN FLAMES OR HOT SURFACES. HEAT AND/OR
UV RADIATION MAY CAUSE FORMATION OF CHLORIDES, FLUORIDES AND
PHOSGENE .
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED CARTRIDGE RESPIRATOR FOR
ORGANIC VAPORS IF CONDITIONS REQUIRE. PRESENCE OF ADEQUATE
BREATHING O2 MUST BE ASSURED.
Ventilation:GOOD GENERAL VENTILATION.
Protective Gloves:CHEM RESISTANT RUBBER/PLASTIC GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SFTY SHOWER/EYEWASH STATION SHOULD BE AVAIL.
SEE "RECOM FOR SAFE USE & HNDLG OF INSTAPAK FOAM-IN-PLACE CHEM"
(SUPP DATA)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: RUPTURE DUE TO LOW BOILING TRICHLOROFLUOROMETHANE.
OTHER PROT EQUIP:BULLETIN BEFORE OPERATING EQUIPMENT.
Chemical Properties
HCC:T6
Boiling Pt:B.P. Text:100F,38C
Vapor Pres:900@100F
Vapor Density:4
Spec Gravity:1.14@25C
Solubility in Water:PARTIALLY SOLUBLE
Appearance and Odor:CLEAR, AMBER LIQUID, SLIGHT AROMATIC.
Percent Volatiles by Volume:14.9
Stability
Stability Indicator/Materials to Avoid:YES
ISOCYANATES; AVOID CONTACT UNLESS MIXED AT PROPER RATIO.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:BY FIRE/EXTREME HEAT, OXIDES OF CARBON
AND NITROGEN, HYDROGEN CHLORIDE, HYDROGEN FLUORIDE(CORROSIVE).
PHOSGENE .
Disposal
Waste Disposal Methods:INCINERATE OR DISPOSE OF IN ACCORDANCE WITH
EXISTING FEDERAL, STATE AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. ALSO SEE "RECOMMENDATIONS FOR SAFE USE AND HANDLING OF
INSTAPAK FOAM-IN-PLACE CHEMICALS " BULLETIN.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.